Cobalt L4-2.2L (2008)
1. Install the air outlet resonator to the throttle body.
2. Connect the fresh air duct to the air outlet resonator.
Notice: Refer to Fastener Notice.
3. Tighten the air outlet resonator to throttle body clamp.
Tighten the clamp to 5 N.m (44 lb in).
4. Align the air outlet resonator to the bracket and install the push-pin fastener.
5. Connect the air cleaner assembly fresh air duct to the air outlet resonator.
Tighten the clamp to 5 N.m (44 lb in).
6. Connect the IAT sensor harness connector.