Cobalt L4-2.2L (2008)
3.1
Open the hose clamp (2) fully, disengaging the worm screw.
3.2
Slide the hose clamp (2) over the surge tank outlet hose.
3.3.
Hand-start the worm screw to engage the hose clamp over the hose.
3.4.
Position the hose clamp (2) along the top of the existing spring clamp (1). The screw head should be on the outboard side of the hose and
facing forward.
3.5.
Tighten the hose clamp. Keep the two clamps beside each other but with no overlap.
4.
If the surge tank fluid level is below the cold full line, top it off to the line with coolant.
5.
Wipe any spilled or leaked coolant from the engine and engine compartment.
6.
Replace the engine cover.
6.1.
Engage the two pins.
6.2.
Replace the oil cap.
Courtesy Transportation
The General Motors Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered
by the New Vehicle Limited Warranty. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period
and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that
shuttle service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors
