Cobalt L4-2.2L (2008)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Outlet Resonator Replacement
Air Cleaner Outlet Resonator Replacement
Removal Procedure
1. Disconnect the intake air temperature (IAT) sensor harness connector.
2. Loosen the air cleaner assembly fresh air duct to resonator clamp.
3. Remove the push-pin fastener from the air outlet resonator/duct assembly to support bracket.
4. Loosen the resonator to throttle body clamp.
5. Disconnect the air cleaner assembly fresh air duct from the resonator.
6. Remove the air outlet resonator from the throttle body.
Installation Procedure
