Cobalt L4-2.2L (2008)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Inlet Duct Replacement
Air Cleaner Inlet Duct Replacement
Removal Procedure
1. Remove the right front tire and wheel.
2. Remove the right front fender liner.
3. Remove the air cleaner intake duct assembly push-in fasteners.
4. Remove the air cleaner intake duct assembly bolt.
5. Remove the intake duct assembly from the vehicle.
Installation Procedure
1. Position the intake duct assembly.
Notice: Refer to Fastener Notice.
2. Install the intake duct assembly bolt.
Tighten the bolt to 10 N.m (89 lb ft).
3. Install the intake duct assembly push in fasteners.
4. Install the right front fender liner.
5. Install the right front tire and wheel.