Cobalt L4-2.2L (2008)
![background image](/chevrolet/cobalt/l4-2.2l/Page-260002.png)
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the engine harness electrical connector to the MAF/IAT sensor.
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the engine harness electrical connector to the MAF/IAT sensor.