Cobalt L4-2.2L (2008)
Negative: Service and Repair
Battery Negative Cable Replacement (Battery to Battery Tray)
Battery Negative Cable Replacement (Battery to Battery Tray)
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Disconnect the negative battery cable.
2. Disconnect the body harness electrical connector (7) from the battery current sensor (6).
3. Remove the negative battery cable ground bolt (4).
4. Separate the negative battery cable terminal (5) from the battery support.
5. Remove the negative battery cable (3).
Installation Procedure
