Cobalt L4-2.2L (2008)
Positive: Service and Repair
Battery Positive Cable Replacement (Battery to Underhood Junction Block)
Battery Positive Cable Replacement (Battery to Underhood Junction Block)
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Disconnect the negative battery cable.
2. Remove the carpet.
3. Open the positive battery cable (1) cover.
4. Loosen the positive battery cable bolt.
5. Remove the positive battery cable from the battery.
6. Disconnect the positive battery cable electrical connector (9) from the body harness electrical connector (8).
