Cobalt L4-2.2L (2008)
17. Install the rear coil springs. Refer to Coil Spring Replacement (See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil
Spring/Coil Spring Replacement) .
Shock Absorber
18. Install the lower shock bolts. Refer to Shock Absorber Replacement (See: Suspension Strut / Shock Absorber/Service and Repair/Rear Suspension
Shock Absorber/Shock Absorber Replacement) .
19. Lower and remove the hydraulic lift table.
20. If applicable, connect the ABS sensor harness connector and harness to axle retainer.
21. Connect the park brake cables to the axle brackets and rear brakes. Refer to Parking Brake Rear Cable Replacement (Drum) Parking Brake Rear
Cable Replacement (Disc) .
22. Bleed the brake system. Refer to Hydraulic Brake System Bleeding (Pressure) Hydraulic Brake System Bleeding (Manual) .
23. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
24. Verify the rear wheel alignment. Refer to Wheel Alignment Specifications (See: Alignment/Specifications) .
25. Lower the vehicle.