Cobalt L4-2.2L (2008)
MY or QLG for the 2007-2008 MY) should then be selected from the list to program the correct calibration. Select "Save Options" on each of the
remaining screens until completed.
If original equipment tires/wheels are reinstalled, it will be necessary to reset the programming of the PCM and BCM modules to the original
specifications.
Tire Label
After installing the recommended P205/55R16 tires, place the provided tire label on the vehicle. The new tire label should be located within the red box,
over the top of the original tire label found on the door jam. To locate the label within the red box use the upper and left hand edge of the red line as a
guide. When properly placed, the new tire label will obscure the original tire information. Be sure that the surface is clean and dry. The surface
temperature should not be less than 21°C (65°F). The label is provided as a guide for tire inflation pressures.
Calibration Information Documentation
Make a copy of the "Accessory Wheel and Tire Information Form" included in this bulletin.
Provide all information required on the form.
Make a copy of the completed form for the customer to keep in the vehicle along with their Owners Manual.
File the original completed form in the Dealerships Vehicle Service History folder.
Warranty Information
Wheels
Part and labor expense to install GM Accessory Wheels as well as labor to program any affected modules "IS NOT" covered under the terms of the
Bumper to Bumper Warranty. All GM Accessories sold and permanently installed on a GM vehicle PRIOR to new vehicle delivery will be covered
under the provisions of the New Vehicle Limited Warranty.
For the U.S.,in the event GM Accessories are installed AFTER new vehicle delivery, or are replaced under the new vehicle warranty, they will be
covered (parts and labor) for the balance of the vehicle warranty, but in no event less than 12 months/12,000 miles. This coverage is only effective for
GM Accessories permanently installed by a GM dealer or a GM approved ADI (Accessory Distributor / Installer).
For Canada, in the event GM Accessories are installed AFTER new vehicle delivery, they will be covered (parts and labor) for the balance of the vehicle
warranty, or up to 12 months/unlimited kilometers depending on month installed. For replacement after the new vehicle warranty expires, but within the
12 months/unlimited kilometers coverage, refer to claim type "B" guidelines.
GM Accessories sold over-the-counter, or those not requiring installation, will continue to receive the standard GM Dealer Parts Warranty of 12 months
from the date of purchase (parts only).
Tires
Any approved tire installed on a GM Vehicle PRIOR to delivery will be covered under the provisions of the New Vehicle Limited Warranty.
Tires are covered against defects in material and workmanship. Tires are warranted for defects "without" prorated charge for tread mileage.
Subsequent replacements under this warranty will continue to be covered for the remainder of the New Vehicle Limited Warranty.
Any approved tire installed on a GM Vehicle PRIOR to delivery may continue to be warranted on a prorated basis by the tire manufacturer once the New
Vehicle Limited Warranty expires.
Any approved tire installed AFTER delivery will be covered under the provisions of the tire manufacturer warranty.
USA dealers should refer to GM Warranty Administration Bulletin 00-03-10-003I and GM Parts Process / Policy Bulletin IB03-001 for more
information.
Canadian dealers should refer to GM Warranty Administration Bulletin 01-03-10-003C.
GM Warranty Claims Processing
Only GM dealerships have the ability to file warranty claims for GM Parts and Accessories. Therefore, any warranty claims filed against such parts must
be handled by the servicing GM dealership. This includes those parts purchased from a GM-approved ADI (Accessory Distributor / Installer).
