Cobalt L4-2.2L (2008)
Fluid Line/Hose: Service and Repair
Automatic Transmission Oil Cooler Pipes Replacement
Automatic Transmission Oil Cooler Pipes Replacement
Removal Procedure
Notice: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid
loss.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Position a drain pan under the transaxle cooler pipes.
3. Remove the transaxle oil cooler pipes retaining nut from the transaxle.
4. Remove the transaxle oil cooler pipes from the transaxle.
5. Using J 41623-B remove the transaxle oil cooler pipes from the fittings at the radiator.
6. Remove the transaxle oil cooler pipe from the retaining clip at the radiator.
7. Remove the transaxle oil cooler pipes from the vehicle.
Installation Procedure