Cobalt L4-2.2L (2008)
2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
3. Install the oil pan. Replace the bottom pan if damaged.
Notice: Refer to Fastener Notice .
4. Install the oil pan attaching bolts.
Tighten the bolts to 10 N.m (89 lb in).
5. Lower the vehicle.
6. Check the pan for leaks. Refill the transmission to the proper level. Refer to Fluid Capacity Specifications (See: Specifications/Capacity
Specifications) .
7. Recheck the fluid level. Refer to Transmission Fluid Check (See: Testing and Inspection/Component Tests and General Diagnostics/Transmission
Fluid Check) .
8. Inspect the oil pan gasket for leaks.
