Cobalt L4-2.2L (2008)
Seals and Gaskets: Service and Repair
Front Wheel Drive Shaft Seal and Output Shaft Sleeve - Left
Front Wheel Drive Shaft Seal and Output Shaft Sleeve Replacement - Left Side
Special Tools
*
J 8092 Driver Handle
*
J 41102-1A Axle Seal Installer
*
J 41227 Output Shaft Sleeve Remover
*
J 41228 Output Shaft Sleeve Installer
Removal Procedure
1. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the left drive axle assembly. Refer to Wheel Drive Shaft Replacement (See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Wheel Drive Shaft Replacement) .
3. Remove the snap ring from axle. Discard the snap ring. Do not reuse.
