Cobalt L4-2.2L (2008)
Notice: Refer to Fastener Notice .
6. Hand start the bolts.
Tighten the bolts to 14 N.m (124 lb in).
7. Install the transmission side cover. Refer to Control Valve Body Cover Replacement (See: Control Valve Body Cover Replacement) .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM),
powertrain control module (PCM), or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
8. Reset the TAP values. Refer to Transmission Adaptive Functions (See: Description and Operation/Transmission Adaptive Functions) .
