Cobalt L4-2.2L (2008)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder Replacement (MU3)
Clutch Master Cylinder Replacement (MU3)
Removal Procedure
1. Remove the clutch pedal retainer from the front of the clutch pedal assembly.
2. Pull the clutch pedal upward in order to disengage the clutch master cylinder pushrod from the clutch pedal.
3. Remove the UBEC. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .
4. Place a shop towel under the clutch master cylinder in order to catch any fluid loss.
5. Disconnect the clutch hose (1) from the clutch master cylinder.
6. Disconnect the clutch line (2) from the clutch master cylinder.
7. Cap the reservoir and hydraulic lines in order to prevent fluid loss and contamination.
8. Rotate the clutch master cylinder one 1/4 turn clockwise and remove the cylinder from the vehicle.
Installation Procedure