Cobalt L4-2.2L (2008)
Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder Replacement
Removal Procedure
1. Disconnect the clutch actuator cylinder line.
2. Remove the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Getrag 5 Speed - Manual Transmission/Transmission Replacement) .
3. Remove the clutch actuator cylinder bolts from the transmission.
4. Remove the following components from the transmission:
*
The upper bolt
*
The clutch actuator cylinder
Installation Procedure
Important: Excessive amounts of lubricant on the input shaft splines can contaminate the clutch disc and cause clutch shudder.
