Cobalt L4-2.2L (2008)
Pressure Plate: Service and Repair
Clutch Pressure and Driven Plate Replacement (M86)
Clutch Pressure and Driven Plate Replacement (M86)
Tools Required
J 43482 Clutch Alignment Arbor
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Getrag 5 Speed - Manual Transmission/Transmission Replacement) .
2. Remove the clutch cover bolts one turn at a time, until spring pressure is relieved.
3. Remove the clutch cover and the clutch disc.
Installation Procedure
1. Align the machined side of the flywheel assembly, with the machined side of the cover.
