Cobalt L4-2.2L (2008)
Constant Velocity Joint Boot: Service and Repair
Wheel Drive Shaft Inner Joint and Boot Replacement (GKN)
Wheel Drive Shaft Inner Joint and Boot Replacement (GKN)
Tools Required
J 35910 Drive Axle Seal Clamp Pliers
Disassembly Procedure
1. Position wheel drive shaft bar in a soft jawed vise and clamp securely.
2. Using side cutters, remove and discard the small seal clamp.
3. Remove large seal retaining clamp using a flat-bladed tool and discard the clamp.
