Cobalt L4-2.2L (2008)
Shifter M/T: Service and Repair
MU3 - Manual Transaxle
Transmission Control Lever Knob Replacement
Transmission Control Lever Knob Replacement
Removal Procedure
Important: Be careful of cosmetic damage to the emblem. In case of damage, replace the emblem with a new part.
1. Remove the emblem (1) from the top of the shifter knob.
2. Cut away the runner protector in the center.
3. Mark and drill a 4 mm hole 5 mm deep into the knob, 3 mm from the edge (1) as shown.