Cobalt L4-2.2L (2008)
Windshield Washer Hose: Service and Repair
Windshield Washer Hose Replacement
Removal Procedure
1. Open the hood.
2. Remove the air inlet grille panel.
3. Disconnect the washer hose (1) from the washer container hose (3) at the fender flange.
4. Disconnect the washer hose (1) from the air inlet grille panel plenum flange.
5. Disconnect the fender flange clip (3) from the fender flange.
6. Pull the washer hose pump end out alongside the right front inner fender and into the engine compartment.
7. Remove the washer hose from the vehicle.