Cobalt L4-2.2L (2008)
Installation Procedure
1. Position the washer hose to the vehicle.
2. Secure the washer hose (1) to the air inlet grille plenum flange at three locations.
3. Route the washer hose down alongside the right front inner fender flange.
4. Connect the washer hose fender flange clips (3) to the fender flange.
5. Connect the washer hose (1) to the washer pump hose (3) and secure the fender flange clip (2).
6. Install the air inlet grille panel.
7. Close the hood.
