Cobalt L4-2.4L (2007)
Rear Bumper Bracket: Service and Repair
Impact Bar Anchor Plate Replacement - Rear Bumper
Impact Bar Anchor Plate Replacement - Rear Bumper
Removal Procedure
CAUTION: Refer to Approved Equipment for Collision Repair Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
2. Disconnect the negative battery cable
3. Remove all related panels and components.
4. Repair as much of the damage as possible.
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
IMPORTANT: Note the number and location of the factory welds for installation of the anchor plate.
