Cobalt L4-2.4L (2007)
Backing Plate: Service and Repair
Drum Brake Backing Plate Replacement
Caution: Refer to Brake Dust Caution.
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake drum.
4. Remove the brake shoes.
5. Remove the universal spring (1) from the brake backing plate.
6. Remove the wheel cylinder.
7. Release the rear park brake cable end fitting (1) from the drum brake backing plate.
