Cobalt L4-2.4L (2007)
Hose/Line HVAC: Service and Repair
Suction Screen Installation
Suction Screen Installation
Tools Required
J44551 Suction Screen Kit
Important: Suction screens are intended to be installed in the suction hose after a major compressor failure.
The suction screens are available in 3 different sizes.
1. Insert the J44551-6 Sizing Tool (1) into the suction hose to select the correct size suction screen.
2. Insert the suction screen into the compressor end of the suction hose.
3. Install the correct mandrel (1) to the J44551-5 Screen Installation Tool.
4. Install the J44551-5 (3) over the end of the suction hose and the suction screen (2).
Important: Correct placement of the J44551-5 is critical.
5. Tighten the forcing screw of the J44551-5.
The suction screen is fully installed when the screen is flush with the end of the suction hose fitting.
6. Remove the J44551-5 from the suction hose.
7. Install the J44551-1 Suction Screen Notification Label.
