Cobalt L4-2.4L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Disconnect the evaporative emission (EVAP) canister purge tube from the purge valve.
4. Disconnect the EVAP purge tube from the intake manifold.
5. Remove the EVAP canister valve purge tube.
Installation Procedure
1. Remove the EVAP canister valve purge tube.
