Cobalt L4-2.4L (2007)
6. If equipped with RPOs L61/LE5 with M86 perform the following, remove the engine harness ground nut (1).
7. Remove the engine harness ground terminal (3) from the stud (2).
8. Remove the stud (2).
9. Separate the negative battery cable ground terminal (4) from the engine block.
10. If equipped with RPO LSJ perform the following, remove the engine harness ground nut (1).
11. Remove the engine harness grounds (2).
12. Remove the stud (2).
13. Reposition the engine harness ground (4).
14. Separate the negative battery cable ground terminal (5) from the engine block.