Cobalt L4-2.4L (2007)
11. Connect the engine control module harness connectors (3, 4).
12. Install the under hood electrical center cover.
13. Raise the vehicle.
14. Hand tighten the front transmission mount thru bolt
15. Hand tighten the rear transmission mount thru bolt.
16. Tighten the front transmission mount thru bolt.
Tighten the bolt to 100 N.m (74 lb ft).
17. Tighten the rear transmission mount thru bolt.
Tighten the bolt to 100 N.m (74 lb ft).
18. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
