Cobalt L4-2.4L (2007)
1. Remove the windshield.
2. Place the window on a clean prepared surface.
3. Remove the molding from the windshield using a razor scraper.
INSTALLATION PROCEDURE
1. IMPORTANT: Apply the window reveal moldings in an environment that is free from dust or other dirt that could come into contact
with the sticky backing. Foreign material may cause improper adhesion.
Clean around the edge of the inside surface of the window with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free
cloth.
2. Using a heat gun, ensure that the temperature of the window and the reveal molding is approximately 29-32°C (85-90°F).
