Cobalt L4-2.4L VIN B (2006)
6.
Apply hot glue to the energy absorbing (EA) plastic piece.
Important:
Ensure that the energy absorbing (EA) plastic piece is installed properly. The tail ends of the energy absorbing (EA) plastic piece (2) should
wrap around the anchor posts (1) of the headliner material. The body of the EA plastic piece should be firmly attached to the headliner.
7.
Insert the energy absorbing (EA) plastic piece to the headliner trim with hot glue.
8.
Tuck headliner in place to ensure proper fit with the A-pillar trim panels and sunshades.
9.
Install the A-pillar trim panels. Refer to Windshield Garnish Molding Replacement in SI.
10.
Install the sunshades. Refer to Sunshade Replacement in SI.
11.
Install the assist handle from the vehicle, if equipped. Refer to Assist Handle Replacement in SI.
12.
Install the sunroof finishing lace, if equipped. Refer to Sunroof Finishing Lace Replacement in SI.
