Cobalt L4-2.4L VIN B (2006)
Seat Latch: Service and Repair
The content of this article reflects the changes identified in TSB- 05-08-50-016 Dated: December 13, 2005
Seat Back Release Latch Replacement
Removal Procedure
1. Remove the fastener (1) from the lower lock pillar garnish molding. Sedan shown, coupe similar. Fold the garnish trim away from the latch.
2. Remove the latch bolts.
3. Disengage the clip holding the latch release handle to the rear compartment shelf.
4. Remove the rosebud fastener, which retains the latch cable to the rear compartment shelf.
