Cobalt L4-2.4L VIN B (2006)
6. Position the hook end of the J 38400 (1) under the universal spring and lightly pull the universal spring end out while installing the trailing brake
shoe. Ensure that the universal spring properly engages the brake shoe web hole.
7. Using the J 38400 (1), spread the top of the brake shoes apart.
8. Install the adjuster assembly (2) to the brake shoes.
9. Install the adjuster actuator lever (1) to the brake shoe and the adjuster assembly. Ensure that the lever is properly engaged between the adjuster
assembly and the brake shoe.
Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
