Cobalt L4-2.4L VIN B (2006)
3. With the surge tank raised, install the surge tank outlet hose.
4. Reposition the hose clamp using J 38185 to secure the hose.
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the surge tank nut.
^
Tighten the nut to 10 Nm (89 inch lbs.).
6. Set the underhood junction block bracket into position.
7. Install the underhood junction block bracket nuts (1, 2).
^
Tighten the nuts to 10 Nm (88 inch lbs.).
8. Install the underhood junction block bracket bolt (3).
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
