Cobalt L4-2.4L VIN B (2006)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Actuator Replacement - Intake
Camshaft Position Actuator Replacement - Intake
^
Tools Required
^
J 44217 Timing Chain Tensioner Tool
^
J 45059 Angle Meter
Removal Procedure
1. Remove the camshaft cover.
2. Remove the upper timing chain guide bolts and guide.
3. Install a 24 mm wrench onto the hex on the camshaft in order to hold the camshaft.
4. Loosen, but DO NOT remove the intake camshaft actuator bolt.
