Cobalt L4-2.4L VIN B (2006)
1. Position the crankshaft balancer.
2. Install a NEW crankshaft balancer bolt.
3. Use the J 38122-A to hold the crankshaft balancer in order to prevent the balancer from rotating while tightening the bolt.
4. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the crankshaft balancer bolt.
^
Tighten the bolt to 100 Nm (74 ft. lbs.) plus an additional 125 degrees using the J 45059.
5. Install the drive belt.
