Cobalt L4-2.4L VIN B (2006)
5. Install the intake camshaft (1). Lubricate with GM PN 12345501 (Canadian PN 992704) or equivalent.
6. Install the camshaft bearing caps. Hand tighten the cap bolts.
7. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the bearing cap bolts in increments of 3 turns until they are seated.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
8. Install the intake camshaft position actuator.
