Cobalt L4-2.4L VIN B (2006)
Notice: Refer to Fastener Notice in Service Precautions.
9. Tighten the transaxle mount to transaxle bolts in the sequence shown.
^
Tighten the bolts to 45 Nm (33 ft. lbs.).
10. Tighten the engine mount to bracket bolts in the sequence shown.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
11. Remove the floor jacks from under the oil pan.
12. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.
13. Raise the vehicle.
