Cobalt L4-2.4L VIN B (2006)
DEFROSTER DUCT REPLACEMENT - WINDSHIELD
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) retainer.
2. Remove the windshield defroster duct retaining screws.
3. Remove the windshield defroster duct.
INSTALLATION PROCEDURE
1. Install the windshield defroster duct.
2. Install the windshield defroster duct screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.5 N.m (13 lb in).