chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 15456 > < SIR Disabling and Enabling Zones|Page 15454

Cobalt L4-2.4L VIN B (2006)

Page 18
background image

2. Connect the roof rail module - left connector to the vehicle harness connector.
3. Install the CPA to the roof rail module - left connector.
4. Install the garnish molding to the left upper lock pillar.

5. Connect the seat belt retractor pretensioner - LF connector.
6. Install the CPA to the seat belt retractor pretensioner - LF connector.
7. Install the left/driver lower center pillar trim.

8. Connect the steering wheel module coil connector to the vehicle harness connector.
9. Install the CPA to the steering wheel module coil connector.

SIR Disabling and Enabling Zones|Page 15456 > < SIR Disabling and Enabling Zones|Page 15454