Cobalt L4-2.4L VIN B (2006)
IMPORTANT: This inflatable restraint sensing and diagnostic module (SDM) has 2 fused power inputs. To ensure there is no unwanted SIR
deployment, personal injury, or unnecessary SIR system repairs, remove both AIR BAG and SDM fuses from the BCM fuse center. With the AIR
BAG fuses removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not
indicate an SIR system malfunction.
6. Remove the left/driver outer trim cover from the instrument panel (I/P).
7. Remove the connector position assurance (CPA) from the steering wheel module coil connector.
8. Disconnect the steering wheel module coil connector from the vehicle harness connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil connector to the vehicle harness connector.
3. Install the CPA to the steering wheel module coil connector.
4. Install the left outer trim cover to the I/P.
