Cobalt L4-2.4L VIN B (2006)
9. Remove the lower right center pillar trim.
10. Remove the CPA from seat belt retractor pretensioner - RF connector.
11. Disconnect the seat belt retractor pretensioner - RF connector from the vehicle harness connector.
12. Remove the passenger/right outer trim cover from the instrument panel (I/P) (3).
13. Remove the CPA from the I/P module connector (1).
14. Disconnect the I/P module connector (1) from the vehicle harness connector (2).
15. Remove the driver/left outer trim cover from the I/P.
16. Remove the CPA from the steering wheel module coil connector.
17. Disconnect the steering wheel module coil connector from the vehicle harness connector.
