Cobalt L4-2.4L VIN B (2006)
3. Install the air cleaner outlet duct to the throttle body and air cleaner housing.
4. Tighten the clamps at the air cleaner housing and throttle body.
NOTE: Refer to Fastener Notice.
Tighten the clamps to 5 N.m (44 lb in).
5. Install the push pin retainer.
6. Install the PCV hose to the camshaft cover.
7. Position the PCV hose clamp at the camshaft cover.
8. Connect the engine harness electrical connector to the MAF/IAT sensor.
9. Install the intake manifold cover.
