chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Heated Oxygen Sensor Replacement - Position 1|Page 5668 > < Heated Oxygen Sensor Replacement - Position 1|Page 5666

Cobalt L4-2.4L VIN B (2006)

Page 4
background image

3. If equipped with RPO M86, perform the following steps, connect the engine harness electrical connector (1) to the HO2S.
4. Install the CPA retainer (2).
5. Install the HO2S connector clip to the thermostat housing.

6. If equipped with RPO MN5, perform the following steps, connect the engine harness electrical connector (2) to the HO2S.
7. Install the CPA retainer.
8. Install the HO2S connector clip to the thermostat housing.

Heated Oxygen Sensor Replacement - Position 1|Page 5668 > < Heated Oxygen Sensor Replacement - Position 1|Page 5666