Cobalt L4-2.4L VIN B (2006)
7. Remove the fuel rail bolts.
8. Pull the fuel rail back and upward to remove the fuel injectors from the cylinder head ports.
IMPORTANT: Use care when removing the fuel rail assembly in order to prevent damage to the fuel injector electrical connector terminals and
spray tips.
9. Remove the fuel rail.
10. Remove the fuel injectors, if necessary.
INSTALLATION PROCEDURE
IMPORTANT: Install NEW lower O-rings when reusing fuel injectors. Lubricate the injector tip O-rings prior to installing the injectors into the
intake manifold.
1. Remove the fuel injectors, if necessary.
2. With the fuel injectors positioned downward, lower the fuel injectors into the cylinder head ports.
3. Carefully push the fuel injectors into the cylinder head ports.
