Cobalt L4-2.4L VIN B (2006)
11. Install the CPA to the seat belt retractor pretensioner - LF connector.
12. Install the lower center pillar.
13. Install the AIR BAG (1) and SDM (2) fuses into the BCM fuse center.
14. Install the BCM fuse center cover.
15. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
16. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle.
