Cobalt L4-2.4L VIN B (2006)
5. Locate and remove the AIR BAG (1) and SDM (2) fuses from the BCM fuse center.
IMPORTANT: This inflatable restraint sensing and diagnostic module (SDM) has 2 fused power inputs. To ensure there is no unwanted SIR
deployment, personal injury, or unnecessary SIR system repairs, remove both AIR BAG and SDM fuses from the BCM fuse center. With the AIR
BAG fuses removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not
indicate an SIR system malfunction.
6. Open front hood, and locate the front end sensor (2).
7. Remove the connector position assurance (CPA) from the front end sensor connector.
8. Remove the front end sensor connector from the front end sensor (2).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the front end sensor connector to the front end sensor (2).
3. Connect the CPA to the front end sensor connector.
