Cobalt L4-2.4L VIN B (2006)
7. Using the following procedure, remove the ignition lock cylinder case shear bolt:
1. Use a hammer and chisel to bite into the shear bolt at a position offset from center.
2. Tap the chisel to rotate the bolt in order to loosen it. Repeat as necessary until bolt is loose enough to remove.
Important: The lock cylinder must be in the RUN position for the lock cylinder case removal. If the lock cylinder is stuck in the OFF position
with the lock bolt engaged then proceed to step 8 for cutting off the lock cylinder housing collar.
8. With the ignition in the run position, remove the ignition lock cylinder case housing from the steering column.
