chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Ignition - Key Stuck in Ignition Lock Cylinder|Page 2271 > < Ignition - Inadvertent Turning of Ignition Lock Cylinder
Page 1
background image

Ignition Switch Lock Cylinder: Customer Interest
Ignition - Key Stuck in Ignition Lock Cylinder

Bulletin No.: 06-02-35-004

Date: February 02, 2006

TECHNICAL

Subject:
Ignition Key Stuck (Replace Shifter Assembly or Ignition Lock Cylinder Assembly)

Models:
2005-2006 Chevrolet Cobalt
2005-2006 Pontiac Pursuit (Canada Only)

Condition

Some customers may comment that they cannot remove the key from the ignition.

Cause 1

The pin that activates the micro-switch may have moved out of position (refer to illustration above). This causes the micro-switch to fail to engage when
the vehicle is placed in Park.

Cause 2

Metal flashing left in the cylinder may cause this condition.

Correction 1

Replace the shifter assembly. 

Correction 2

Replace the ignition lock cylinder.

Parts Information

Warranty Information

Ignition - Key Stuck in Ignition Lock Cylinder|Page 2271 > < Ignition - Inadvertent Turning of Ignition Lock Cylinder