Cobalt L4-2.4L VIN B (2006)
5. Locate and remove the AIR BAG (1) and SDM (2) fuses from the BCM fuse center.
IMPORTANT: This inflatable restraint sensing and diagnostic module (SDM) has 2 fused power inputs. To ensure there is no unwanted SIR
deployment, personal injury, or unnecessary SIR system repairs, remove both AIR BAG and SDM fuses from the BCM fuse center. With the AIR
BAG fuses removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not
indicate an SIR system malfunction.
6. Remove the garnish molding from the right upper lock pillar.
7. Remove the connector position assurance (CPA) from the roof rail module - right connector.
8. Disconnect the roof rail module - right connector from the vehicle harness connector.
