Cobalt L4-2.4L VIN B (2006)
9. Install a new intermediate shaft to steering gear pinch bolt.
^
Tighten the bolt to 34 Nm (25 ft. lbs.).
10. Install the left front wheel.
11. Check for proper steering wheel alignment. If steering wheel is out of alignment perform the following:
1. Remove the intermediate shaft pinch bolt at the steering column.
2. Disconnect the intermediate shaft in order to rotate and reconnect as needed to straighten the steering alignment.
3. Install a new intermediate shaft pinch bolt.
^
Tighten the bolt to 34 Nm (25 ft. lbs.).
