Cobalt L4-2.4L VIN B (2006)
1. Install the manual transaxle flywheel.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the manual transaxle flywheel bolts.
^
Tighten the bolts to 53 Nm (39 ft. lbs.) plus an additional 25 degrees using the J 45059.
3. Install the automatic transaxle flywheel bolts.
^
Tighten the bolts to 53 Nm (39 ft. lbs.) plus an additional 25 degrees using the J 45059.
4. Remove the J 38122-A.
5. If equipped with a manual transaxle, install the clutch.
6. If equipped with a automatic transaxle, install the transaxle.