Cobalt L4-2.4L VIN B (2006)
Important: Keep the cutting edge of the tool against the rear window.
7. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinchweld flange.
*
The only suitable lubrication is clear water.
*
Use J 24402-A, J 39032 or equivalent in order to remove the window.
8. With the aid of an assistant, use the suction cups in order to lift the rear window from the opening.
Installation Procedure
1. Install the stationary rear window into the opening.
2. Connect the rear window electrical connectors.
3. Install the lock pillar garnish moldings.
4. Close the rear compartment lid.
5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
